Feeders for Show Pigs

Show Stopper Equipment, your livestock grooming supplies & show animal equipment source!      

Hanging Show Pig Pen Feeders



16" Divided Hanging Feeder Complete
w/hanging clips and chain

16" Divided Hanging Feeder Complete
with Hanging Clips & Lock Down Chain

  • Feeder measures 16" wide  x 7" deep & 7" high
  • Feeder has 3 1/2" high plastic divider in the middle of the feeder for dual water or feed compartments
  • Tough plastic easy to move from show to show
  • Two heavy-duty clips included to mount feeder on gate off of the floor
  • Heavy chain mounted on bottom to keep feeder from being flipped over
  • Optional wire panel to attach to wooden gates and then clip feeder to panel

VPEFEEDE16HC
Ordering Information


Complete Hanging Feeder
(picture shows feeder mounted on show gate)

18" Hanging Pig Feeder Complete
w/Lock Down Chain & Hanging Clips 
(No Center Divider)

  • Feeder measures 18" wide x 8" deep x 8 high
  • Tough plastic easy to move from show to show
  • Two heavy-duty clips included to mount feeder on gate off of the floor
  • Heavy chain mounted on bottom to keep feeder from being flipped over
  • Optional wire panel to attach to wooden gates and then clip feeder to panel


VPEFEEDE18HC
Ordering Information

10" Hanging Feeder Complete
w/Lock Down Chain & Hanging Clips
(No Center Divider)

  • Feeder measures 10" wide x 8" deep x 7 high
  • Tough plastic easy to move from show to show
  • Two heavy-duty clips included to mount feeder on gate off of the floor
  • Heavy chain mounted on bottom to keep feeder from being flipped over
  • Optional wire panel to attach to wooden gates and then clip feeder to panel

 

VPEFEEDE10HC
Ordering Information


Mesh Wire Panel
shown w/complete 16" hanging feeder, mounted to gate 

Mesh Panel

16" x 24" Mesh Wire Panel Only 
to mount hanging feeder

VPEFEEDHFMP
Ordering Information

 

 

 

 

Galvanized Show Pig Feeders (welded)


Single hole has an 80 lb feed capacity
for up to 4 head and
measures 12 x 22 x 31
27 lbs.

 

  • An excellent feeder for show pigs.
     
  • Constructed of durable 20 ga. galvanized steel 
     
  • Lid on top of feeder and trough lids 
     
  • Adjustable feed slide in trough

 


Double hole has a 155 lb feed capacity
for up to 8 head and
measures 24 x 22 x 31
45 lbs.

Single Galv. Show Pig Feeder VPEFEEDP1A Ordering Information
Double Galv. Show Pig Feeder VPEFEEDP2A Ordering Information

 

Galvanized 2 Hole Show Pig Feeder (bolt together)

  • An excellent feeder for show pigs. 
     
  • 185 lb feed capacity 
     
  • 23" wide x 20" long x 36" tall
     
  • Top lid folds forward
     
  • Lids on trough 
     
  • Assembly required

VPEFEEDP5A
Ordering Information

 

 

Powder Coated Steel Show Pig Feeders

Single door hole has
50 lb feed capacity and measures:
29 1/2" h x 12 3/4" w x 20 3/4"d

  • Made of heavy-duty steel
     
  • Top door flips open from back for easy loading
     
  • Welded bottom, bolted top hopper, hinged lid bolted on
     
  • Ships completely assembled

 

Double hole has 100 lb feed
capacity and measures:
35 3/4" h x 24 1/4" w x 19 3/4"d

Single Powder Coated Steel
Show Pig Feeder
VPEFEEDP3A Ordering Information
Double Powder Coated Steel
Show Pig Feeder
VPEFEEDP4A Ordering Information

 

 

Rotecna Show Pig Single Hole
Automatic Feeder & Waterer     

  • Wet / Dry feeding system stimulates feed intake.
  • Bushel capacity
  • The feed dispenser mechanism simulates natural root behavior.
  • Excellent feed conversion.
  • Comfortable handling and easy cleaning.
  • Made from polypropylene and stainless steel.
  • Optional adjustable bracket to mount feeder on gate

Rotecna Single Hole
Automatic Feeder & Waterer
ROTA-05
Ordering Information

Adjustable Bracket
for Rotecna Feeder

 

  • Optional Mounting Bracket allows for adjustment from floor level to 16" above floor.


Adjustable Bracket Only for Rotecna Feeder
ROTA-05B
Ordering Information
 

 

Kane Nursery Feeders

  • Kane nursery feeders are made of high-density, durable polyethylene with 304 stainless steel grills.
  • These feeders are designed to feed three pigs per hole from weaning up to 60 lbs.
  • Install feeders into fencing and use as a gate or mount directly to the fence or wall.
  • The feed-flow panel is ridged but pliable and works with the pig's natural tendency to agitate. The panel is easily adjusted with oversized knobs conveniently located at the top of the feeder.  This design allows you to keep the panel low to maximize feed consumption and minimize waste.
  • Our solid, non-porous surface is easy to clean reducing the presence of bacteria and significantly cutting costs associated with cleaning and maintenance.

Kane 24" Nursery Feeder - Single Sided

  • 24" X 8" X 24" - 72 Lb Capacity
  • 4 holes

24" Kane Single Side Nursery Feeder
KANPNF-24
Ordering Information

Kane 36" Nursery Feeeder  - Single Sided

  • 36" X 8" X 24" - 102 Lb Capacity 
  • 6 holes

36" Kane Single Side Nursery Feeder
KANPNF-36
Ordering Information

Creep Feeders

9" Stainless Steel Piglet Creep Feeder

  • 304 Stainless Steel
  • Universal J Clamp
  • Feeder or Drinker
  • Easy Feed Access

VITCF9SS
Ordering Information

Kane Baby Pig Feeder w/Brackets

  • 1 ft 2 holes
  • 12" x 6" x 15" tall 
  • Designed to provide ground and pellet feed to baby pigs until weaning, these creep feeders get your piglets off to a great start.
  • The solid, non-porous surface reduces the risk of bacteria and is easy to clean.
  • Our heavy-duty, two piece mounting bracket keeps the feeder secured to end panels or dividers making filling and cleaning easy, with its convenient quick release design

KANKCF-SQ
Ordering Information

Kane Snap Creep Feeders:  2 ¾" Low Profile

  • The Positive J-Hook locking device allows for quick and easy installation to all types of flooring while the economical feed-saver lip and grill significantly reduces feed waste.
     
  • 2 ¾" Tall Low Profile Feeder is perfect for Early Weaners.  It's low profile and water tight trough provides easy access for younger piglets and may be used to provide milk replacement for smaller piglets needing a nutritional boost.

2 ¾" Low Profile Snap Creep Feeder
KANKSF-LP
Ordering Information
 

Rotecna Maxi Pan Creep Feeders

  • Ideal support pan for Wean to Finish facilities. 
  • The superior design and good performance results have turned it into one of  ROTECNA’s leading products. And now improved.

Rotecna Maxi Pan w/Black Collar 

  • Pan grill without rivets without sharp edges, very hygienic and easy to clean.
  • Lower transport volume thanks to an easy “in farm” assembling

Rotecna Maxi Pan w/Black Collar &  J Hook
ROTMAX0C10
Ordering Information

Rotecna Maxi Pan w/Black Collar T Hook
ROTMAX0C10T
Ordering Information

Rotecna Complete Maxi Pan w/Hopper

  • More precise adjustment thanks to the progressive regulation.
  • Translucent hopper allows checking feed amount inside.
  • Pan grill without rivets without sharp edges, very hygienic and easy to clean.
  • Lower transport volume thanks to an easy “in farm” assembling


Rotecna Complete Maxi Pan w/Hopper
ROTMAX0C20
Ordering Information

Use this Rotecna® Maxitainer Liquid Container
with the Maxi Pan Feeders sold separately

Rotecna Maxitainer

Maxitainer is a liquid container for the Maxi Pan feeder especially designed to easy drinking adaptation and dispense medication to sucking pigs during weaning.

 

  • 7-gallon capacity
  • Transparent container
  • Level indicator
  • Easy-to-carry handles
  • No spills: rounded edges
  • Dimensions: 29" H x 12.5" Diameter
  • Weight: 4 lbs.


ROTMAXTA01
7Gallon Rotecna Maxitainer
Ordering Information

 

Parts for Rotecna Maxi Pan Feeders:


 

Rotecna Maxi Pan - Hopper Only

  • With the hopper assembly and regulation, we make the maxi pan a Maxi Hopper Pan.

ROT0-4H
      Ordering Information

Rotecna Maxi Pan - Lid Only

  • LID avoids losses of feed aromas and prevents the entry of humidity and dirt. The lid is prepared for inclined or vertical drop tubes from automatic feeding systems

ROTMAX0CLID
Ordering Information
 

Rotecna Maxi Pan - Hopper Extension Only

  • EXTENSION to increase the capacity up to 51 l. Easy to dismantle for cleaning, without having to undo screws.

ROTMAX0C34
Ordering Information
 

 

Available in   Vittetoe, Inc - Hog Equipment

  • Stainless Steel Nursery Feeders & Finishing Feeders
  • All sizes available, 18 Gauge 304 Stainless Steel
  • Call for Prices
  • Plastic & stainless steel lockdown creep & nursery feeders
  • Kane Nursery Feeders

Menu

Search

Promotions & Specials

Contact Info

Vittetoe, Inc.
2112 Keokuk-Washington Rd.
Keota, IA  52248
Ph: 800-848-8386
Fax:641-636-3764
 

info@vittetoe.com

Office Hours:
8:00 AM - 5:00 PM Central M-F